This Upgraded Titanium Heater Element is considered the Best of the 3 styles of heater Incoloy being Good, Teflon Coated being Better and Titanium being Best. This element suitable for use in heater assemblies that are used with Salt systems and it also features a bend used with M7 systems.. This element is also suitable for installation in other heaters with or without thermowells. Terminals are spaced 1-1/4" apart, supplied with hardware. Metal bulkheads. This item is a 5.5KW/1.375KW Heater Element for 230V or 115V Applications that features the bend in the back of the element needed to fit the Balboa M-7 heater tubes. This also fits Gecko, ACC, and most other standard Hot Tub Heaters, This part is used in newer hot tubs and features . We have plenty of these. Buy with caution I Do Not Accept returns! Note: When testing this heater if it trips the breaker simply unplug it and if the breaker stays on plug back in and if it trips this heater is the cause if it is not a breaker trip issue then measure between the two terminals with an Ohm meter it should measure about 10.5K ohms. If it measures 0K it is open. If it is not tripping the breaker and doesn't measure open then the heater is not bad look for other issues that cause no heat Like a Pressure Switch, Stopped up filter, No water movement, Open circuit on board etc..
This product hasn't received any reviews yet. Be the first to review this product!