Hot Tub Parts of America

4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To

(4 reviews) Write a Review
SKU:
ASPIMP-56WUA400
Shipping:
Calculated at Checkout
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • This seal fits a pump that looks like this...
  • There are 3 different wet ends that look very similar watch the video for help determining which one you have...
  • The shaft on the motor that this impeller fits is not a standard shaft so you must be sure you have a Chinese Guangdong Motor and pump or this part will not fit..
  • Here are the 3 different screws to help you identify which wet end you have.
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
  • 4HP Impeller fits Intertek LX400 or LP400 56FR WUA Video How To
MSRP: $49.99
$39.99
— You save $10.00

Description


Read This Note First!!

NOTE: This Part will NOT Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End for internal parts of that wet end you already have click here Jacuzzi® & Sundance® LX Parts

This 4.0 Horse Power Impeller fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. The pump this impeller fits usually have the part number WUA-400, WP-400 or LP-400 on the label. SEE NOTES BELOW... Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 4 13/64"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the sleeve in the back, it also measures 7/16" from the inside of the vane edge to edge. Some of these impellers have a number on them B358-02 if yours does you must measure the overall width of the impeller to get the correct one. They cast one implore with that number on it and they trim the impeller down to the different horse powers so be sure you do measure edge to edge... NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange see the video for how to tell the difference! 

Note: This Impeller Fits Intertek Chinese LX and LP series Pumps only Some Pump Part numbers are as follows: (WUA400-II, WUA400-I)  (LP400) (WP400-II/,400-I)
 
Note: Colors Can Vary usually Black or Yellow..  
 
To Install this Impeller you will have to remove the face plate and unscrew the impeller. There are time where you will have to disassemble the motor in order to loosen the impeller because they get stuck when they leak. Note: We offer parts & kits for this wet end and complete pumps in our store. Choose with care, I Do Not accept returns so be sure these are correct before ordering!  I do offer FREE SHIPPING within the United States. 
 
1000VG-1000USSPS1000B5250-106AS-1000071734SPS-1000,319-3100B,waterway, executive, hiflo, hi-flo, wet end, wet end, spa wet end seal , hot tub wet end seal, 1000 seal, p-1000 seal, ps-1000 seal, p 1000 seal, ps 1000 seal
Visit our Store as we also offer these and other associated products and accessories for your Spa.
Please note: When you have a seal leaking in most cases you will need an impeller because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impeller. We offer the impellers along with the seal in a kit in our store. Watch the video above for how to install the seal and other repairs for this pump as well.
WUA200-II,WUA300-II,WUA400-II,WUA200-I,WUA300-I,WUA400-I,LP200,LP250,LP300,LP150,WP200-II,WP250-II,WP300-II,WP200-I,wp250-I,wp300-I,wp400-I
WUA200,WUA300,WUA400,WUA200,WUA300,WUA400,LP200,LP250,LP300,LP150,WP200,WP250,WP300,WP200,wp250,wp300,wp400,chinese,lx,guangdong,energy saver spa equipment,b351-21
 
View AllClose

4 Reviews

  • 5
    A perfect fit

    Posted by Unknown on Sep 27th 2020

    Watched the video describing the various models and determined the correct impeller for my own pump , the photos of the various impellers sealed it when I could see the same numbers cast within as my own, fitted perfectly without any hassle.I am a spare parts man of some 52 years in the trade and whilst appreciating the video I found the presentation needed to cut to the chase. But hey many thanks

  • 5
    Propellar

    Posted by Jim on Oct 30th 2017

    Works great

  • 5
    Impeller

    Posted by Jim on Oct 25th 2017

    Easy insall

  • 5
    Just what i needed

    Posted by Jim B on Dec 7th 2016

    Fast, Friendly, Very Helpful, and Great Videos.They go the extra mile for your business , Great Experience !!!

View AllClose